Hi guys, can you help me with this? I can read an understand swedish but this is a little to much, I posted this over on SAABcentral and I was wandering if any of you could translate this for me?
"Hello, I have a problem.
I have a 9 5 ´98 with a rebuilt (by myself) B204/205, the block, pistons, crankshaft are B204 and rest is B205. All new bearings, new gaskets, new oil pump. Runs great but oil pressure drops when it warms up fully. After driving for 25-30 minutes the oil pressure light comes on when idling. I put a mechanical gauge on the pressure side and found out that the pressure is 1,3 bar at 2000 rpm when it should be 2,5 bar.
When cold (5°c), pressure is over 4 bar when idling.
Any ideas? "
I would then post this in the motor forum.
Thanks, Jón Gunnar Kristinsson