Hi all
I decided that I wanted to have a double din on my 9000, which I will use to install a radio double din or a carpc (home made).
Since I intend to have a GPS system on it I got to the conclusion that If it needed to be as high as possible on the dashboard. I check the electric cables/connection on the AC/fan module control and then saw it was possible to move it down.
I also check if the standard 2din dimension would fit bellow the ventilation system (normally above the ac/fan control module) and they will fit but I need to put the the 2din case as low as I can bellow the ventilation.
If you check the dashboard of the new 9-5 you will see that's exactly the same design although much more modern.
So I used a plastic dashboard that I had to do my "exclusive" dashboard
Here you have some pictures of the process
Here it's almost finish and ready to paint.
Unfortunately the car is in Portugal and I had to get back to Munich (where I live) before being able to complete it. So probably in March I will be able to do it and then show the final result.